Additional Connectors are used to extend or create your own axxys Wall Mounted Handrail Kits
All connectors are supplied with fixings
Left Hand End Connectors are used to connect the end of the rail to the wall. Whilst looking directly at the rail the Left Hand Connector fixes the left hand end of the rail to the wall.
Right Hand End Connectors are used to connect the end of the rail to the wall. Whilst looking directly at the rail the Right Hand Connector fixes the Right hand end of the rail to the wall.
Intermediate Connectors are used to join two lengths of rail together and fix them to the wall
Select the connector you need and either Chrome or Brushed Nickel metal finish
Starting from the first tread nosing, measure vertically a distance of 900mm and mark on the wall, making sure the mark is vertically level with the tread nosing using a spirit level
Next repeat this at the top of the flight, using the last tread nosing which leads onto the landing as your starting point
Now strike a plumb line through the two points, using a suitable marking tool that can be easily removed or a piece of taught string, this plumb line will enable you to mark the other Wall Patrices in the correct position.
Next you must measure the length of this line between the two vertical points that you have marked (x in the equation), then divide this number by 4 ensuring the result (y in the equation) is not more than 1000mm, and using your measurement mark these other centre positions along the line
Next you must cut the lengths of AXXYS Handrail down if the result of your calculated measurement is less than 1000mm. Using a suitable saw, mark and cut each length of Handrail down to your measurement, ensuring the cuts are accurate and level.
Now starting at the bottom using your first marked position, drill and secure the first Wall Patrice onto the wall using appropriate fixings
Please Note; Always remember to drill pilot holes with a suitably sized drill bit when fixing screws into timber, as this will prevent damage to the screw head and Patrice and ensure an easier fit. This is especially important when working with any variant of hardwood such as Oak
Repeat this and fix the next Wall Patrice moving up the stairs.
Next you can assemble a AXXYS Left Hand Connector or Right Hand Connector (depending on the orientation of your stairs) with a length of AXXYS Handrail and anAXXYS Intermediate connector using the fixing screws provided, making sure you have 2 screws going into the end grain and 2 screws underneath at the Intermediate Connector
Once the first section of the Handrail is assembled and securely tightened you can now offer this up to the Wall Patrices and fix using the screws provided, ensuring the connectors are mounted centrally and in line with the Wall Patrices
Continue up the stairs using the same procedure as before for assembling the next length of Handrail & Connectors.
Once assembled the second section can be inserted into the Intermediate connector of the first section and secured, making sure that it lines up with the Wall Patrice centrally before fixing
Once you are up to the final length of handrail, terminate the end using either Left Hand or Right Hand Connector and mount this to your last Wall Patrice, ensuring it is lined up with all marks and level in relation to all other Handrail sections
You have now completed the installation of the axxys Rail in a Box, you can now remove the original marked plumb line and check all fixings are secure and tightened.
Cleaning of the product can be done with a damp cloth or a lint free dry cloth depending on the level of cleaning required. Avoid the use of heavy detergents as this can damage the finish to the timber and metal connectors
We deliver to UK Mainland only. We charge £10 shipping for orders up to £150. Orders over this have a flat fee of £15. However, our couriers do deliver to most offshore locations but charge a premium which unfortunately we have to pass on. Contact us for prices to Isle of Wight, Scottish Isles, Northern Ireland and Channel Isles etc.
IMPORTANT: PLEASE DO NOT BOOK ANY TRADESMAN OR SCHEDULE WORK UNTIL YOUR ORDER HAS BEEN RECEIVED AND CHECKED. BLUEPRINT JOINERY WILL NOT ACCEPT ANY LIABILITY FOR LOSS OF TIME OR MONIES DUE TO DELAYED DELIVERY.
We wrap and pack your order to ensure the product reaches you in the condition it left us, however, occasionally transport damages do occur. On the day of your delivery please check all products are present and in good condition.
Should you decide to return the products you must notify us of the refund within 14 Working Days of receipt of the goods. You have a further 14 days to return the goods to us.
Deliveries are made using a 3rd party carrier, due to the weight and length of our product we cannot give timed deliveries, however, we can specify a suitable day when you can be available to accept and sign for your order. Our 3rd party carrier does not give pre-delivery calls prior to the delivery, it is an all day delivery slot.
Deliveries are made using a 3rd party carrier on pre-arranged delivery days where possible. Delivery times shown on Go Banana are estimated, if we have not contacted you to arrange a specific delivery day then please email us to confirm. A note of the delivery day will be found on the sales invoice - If we haven't emailed please check there.
You will need to be available to help unload and sign for your order. When you sign for your order you are accepting that the goods are all present and received in good condition.
We advise that all customers:
1) Check you are signing for the correct number of parcels
2) Check all parcels are addressed to you
3) Check that all parcels are undamaged - if there are any signs of damage to any of the parcels ensure you sign and write "damaged" on the delivery slip
4) Open all parcels on the day of delivery to check all products have been received in good order and complete
5) Contact us on the day of delivery if there are any issues with your order
6) Blueprint Joinery will replace any damaged products on a next working day service.
IMPORTANT: If the above is not acceptable to you then we can pick and pack your order ready for you to collect or send in your own transport. Please do not buy our product if you do not accept the above delivery statements.