Fix & Fill Expanding Foam & Filler 750Ml Everbuild Quick Setting Gaps Fills X 12

Brand: Everbuild 100% Positive reviews
Hurry! Only 1 left in stock!



Need something specific or  ordering in bulk?

EVERBUILD FIX & FILL are quick setting one part polyurethane foams in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application to up to 50 times its original volume and expands on application by 150%.Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +25oC, ideally 20oC. Benefits · Quick setting - can be cut, sawn or plastered in 1 hour.· Economical in use - expands up to 50 times its original volume.· Fills irregular and broad gaps where most conventional fillers would fail.· Possesses insulating and sound deadening properties. Areas for Use Filling· Gaps around pipe entries through walls.· Gaps around window frames, door frames.· electrical wire chasing prior to plastering· deep joints prior to applying sealant or plaster· irregular gaps in stone, brick, concrete or plaster Fixing· door frames· timber structures· Window sills and thresholds.· Window frames Insulating· Behind cladding to exterior walls.· behind soffit and barge boards· In automotive applications. Surface Preparation Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process. Application ALWAYS WEAR PROTECTIVE GLOVES.Shake can well before use (about 20 times). For the FILL AND FIX PRODUCT, carefully fix nozzle. Do not overtighten or force.ALWAYS USE CAN UPSIDE DOWN. For GUN GRADE, tighten securely into one of our range of guns.Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed whilst still wet with EVERFLEX FOAM CLEANER. Cured foam must be removed mechanically.. When used for fixing door frames, supports must be used until the foam is fully cured. IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with EVERBUILD DUAL PURPOSE FOAM CLEANER before the foam has cured. Do not push any object into the valve as the contents may explode. Specific Data Expansion37 litres (750ml can) 25 litres (500ml can) Cell StructureMedium fineTack FreeApprox. 8 minutesCuttable20 mins to 1 hour depending on bead dimensions.Full Load Bearing StabilityApp, 12 hours (20mm bead)Working Temps5oC - 25oC. (Optimum 20oC)Tensile Strength18N/cm2 (DIN 53455)Elongation At Tension30% (DIN 53455)Shear Strength8N/cm2 (DIN 53422))Flexural Strength20N/cm2 (DIN 53423)Compressive Strength5N/cm2 (DIN 53421) at 10% stress.Water Absorption0.3 Vol % (DIN 53428)Thermal Conductivity0.04 W/Mk (DIN 52612)Temp Res Of Cured BeadLong Term: -40 - +100oCShort Term: -40 - +130oCBuilding Material ClassB3 (DIN 4102, Part 1) Health & SafetyConsult MSDS for full list of hazardsStorageStore upright between 20 and 25oC Pressurized container. Protect from sunlight and do not expose to temperatures above 50oC. Do not pierce or burn the can even after use. Store as flammable liquid.Note: Elevated temperatures will reduce shelf life dramatically.Shelf Life12 months in original containers at stated storage temperatures.
Delivery Policy

Dispatch Time: We normally dispatch the item within 1 working day once the payment is cleared.
Free Delivery: Free delivery usually takes 3-5 working days for the item to be delivered. In some cases, it may take up to 10 working days.
Express Delivery: It takes 1 working day for the item to be delivered after dispatch. In most cases, you will receive your item in 24 Hrs but sometimes it may take more than 1 working day. If needed URGENTLY, please use express service at checkout.
If You are not in to Accept Delivery: If you or the intended recipient is not in when delivery is attempted, the carrier should leave a card confirming that they have tried to deliver. Please follow the instructions on the card to arrange redelivery or collection. If this is not done then the parcel will be returned to the sender and we will contact you. We will then require the delivery cost to be repaid before the goods are resent. We cannot be held responsible if you are not in to receive a parcel or if you fail to rearrange a delivery.

Delivery cut off time: All orders made before 12pm will be dispatched on the same day

Regions included: UK

Return Policy

Returns: You have 14 days of return period if you decided not to keep the item. You will be responsible for the return cost and item returned must be in original packaging unopened and unused condition.
Exchange: If you have decided to exchange the item already received, you need to first return the original item in original packaging unopened and unused condition.
Faulty Item: You will receive a refund or replacement when we have received and tested faulty item which usually takes 1-2 weeks after we have received your item. Some items may need to be sent to the manufacturer for testing or repair which can take longer. We do not offer a replacement service while your item is being tested. If you need to continue using your item then we would suggest that you place a new order for the same or similar product and request a refund for your faulty item.

Return address: AirTech-UK, Unit 19, Wadsworth Business Centre, 21 Wadsworth Rd, Perivale, Greenford UB6 7LQ, United Kingdom