Zinsser ZN7040001E1 Bulls Eye 1-2-3 Primer & Sealer Paint 500ml
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.
Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.
Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.
Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money.
10m² per litre.
Touch dry: 35 minutes.
Hard dry: 7 days.
Recoatable: 1 hour.
The Zinsser BE123500 Bulls EyeÂ® 1-2-3 is supplied in the following:
Container type: Tin.
Standard Delivery is FREE on all orders and takes 3-4 working days.
Returning Faulty Items:
If we have supplied an item that is faulty (or goes faulty within the first 7 days of receipt) please call our Returns Department immediately. We will discuss the fault with you and arrange for a collection of the goods. Goods must be packaged appropriately (minimising the scope for any damage in transit)
Once we have received the goods back from you and satisfied ourselves (and sometimes the manufacturer) that the alleged defects are as reported, we will either replace the goods or arrange a refund of the full value of the goods and any carriage costs incurred.
Please note that most tool manufacturers we deal with offer a 12 month warranty on their products. If the item you have purchased from us develops a manufacturing defect within that 12 month period, please contact us at the earliest opportunity and we will handle the warranty issue with the manufacturer on your behalf.
Returning Damaged Items:
If an item arrives with you that has been damaged in transit you must inform us of this damage within 7 days of receipt of the item. Unfortunately we cannot accept claims for damaged items after 7 days have lapsed.
We will discuss the damage with you and should a replacement item be called for we will arrange for our courier to deliver a replacement to you and collect the damaged item at the same time.
You will need to make yourself available to affect the exchange. You must also enclose your invoice or delivery note with the damaged goods. Goods must be packaged appropriately (minimising the scope for any damage in transit)
We reserve the right to request images of the damaged item or request that the item come back to us in the first instance for inspection of the damage before sending a replacement.
Returning Incorrectly Supplied Items:
If in the unlikely event we have supplied an item incorrectly, please contact us within 7 days and we will arrange for the item to be collected from you and the item you actually ordered to be delivered at the same time.
In certain circumstances we may ask for the incorrect item to be returned ahead of the replacement being sent.
You will need to make yourself available to affect the exchange so that the courier driver can affect the switch. You must also enclose your invoice or delivery note with the incorrect item.
Goods must be packaged appropriately (minimising the scope for any damage in transit)
Returning Incorrectly Ordered Items:
We endeavour to provide as much information within the content of our product pages to allow you to make an informed decision on your purchase. However, should you need to return any item to us, we will allow you to do so within 7 days of receipt of the item.
Please contact our Returns Department at firstname.lastname@example.org at the earliest opportunity to have a return request authorised. You will be asked to include your invoice or delivery note with the item which must be packaged appropriately (minimising the scope for any damage in transit) before returning to us.
You must arrange the return of the goods yourself and track them using a reputable carrier. We ask that you do everything possible to ensure the goods are returned to us in perfect condition so that they can be re-sold as new. As such, original packaging, swing tickets, instruction booklets, etc. must be enclosed with the item.
Upon receipt and after satisfactory inspection, we will issue you with a refund for the item you have returned within 7 days. Please note some items may incur a re-stocking charge - we will clarify this with you when discussing the return.