ForgeFix DWS100BP Drywall Screw Phillips Bugle Head SCT Black Phosp 4.2 x 100mm Bulk 500
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. Boxes of 500 and 1,000 come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.
Designed for fitting dry linings to studding.
Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.
The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.
Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.
Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 100mm Bulk 500
Standard Delivery is FREE on all orders and takes 3-4 working days.
Returning Faulty Items:
If we have supplied an item that is faulty (or goes faulty within the first 7 days of receipt) please call our Returns Department immediately. We will discuss the fault with you and arrange for a collection of the goods. Goods must be packaged appropriately (minimising the scope for any damage in transit)
Once we have received the goods back from you and satisfied ourselves (and sometimes the manufacturer) that the alleged defects are as reported, we will either replace the goods or arrange a refund of the full value of the goods and any carriage costs incurred.
Please note that most tool manufacturers we deal with offer a 12 month warranty on their products. If the item you have purchased from us develops a manufacturing defect within that 12 month period, please contact us at the earliest opportunity and we will handle the warranty issue with the manufacturer on your behalf.
Returning Damaged Items:
If an item arrives with you that has been damaged in transit you must inform us of this damage within 7 days of receipt of the item. Unfortunately we cannot accept claims for damaged items after 7 days have lapsed.
We will discuss the damage with you and should a replacement item be called for we will arrange for our courier to deliver a replacement to you and collect the damaged item at the same time.
You will need to make yourself available to affect the exchange. You must also enclose your invoice or delivery note with the damaged goods. Goods must be packaged appropriately (minimising the scope for any damage in transit)
We reserve the right to request images of the damaged item or request that the item come back to us in the first instance for inspection of the damage before sending a replacement.
Returning Incorrectly Supplied Items:
If in the unlikely event we have supplied an item incorrectly, please contact us within 7 days and we will arrange for the item to be collected from you and the item you actually ordered to be delivered at the same time.
In certain circumstances we may ask for the incorrect item to be returned ahead of the replacement being sent.
You will need to make yourself available to affect the exchange so that the courier driver can affect the switch. You must also enclose your invoice or delivery note with the incorrect item.
Goods must be packaged appropriately (minimising the scope for any damage in transit)
Returning Incorrectly Ordered Items:
We endeavour to provide as much information within the content of our product pages to allow you to make an informed decision on your purchase. However, should you need to return any item to us, we will allow you to do so within 7 days of receipt of the item.
Please contact our Returns Department at firstname.lastname@example.org at the earliest opportunity to have a return request authorised. You will be asked to include your invoice or delivery note with the item which must be packaged appropriately (minimising the scope for any damage in transit) before returning to us.
You must arrange the return of the goods yourself and track them using a reputable carrier. We ask that you do everything possible to ensure the goods are returned to us in perfect condition so that they can be re-sold as new. As such, original packaging, swing tickets, instruction booklets, etc. must be enclosed with the item.
Upon receipt and after satisfactory inspection, we will issue you with a refund for the item you have returned within 7 days. Please note some items may incur a re-stocking charge - we will clarify this with you when discussing the return.