Solid Oak Stair Cladding Treads, 1000mm Board

Brand: Blueprint Joinery Own Brand 100% Positive reviews
QTY:

PRICE: £56.00 INC VAT

EX VAT

Need something specific or  ordering in bulk?

QUOTE ME

Solid Oak Stair Cladding Tread 

Solid Oak Tread for use with 10mm Oak Faced MDF Riser

The Solid Oak Stair Cladding Range is manufactured to order and is usually delivered between 7-10 working days 

This system fits over your existing treads & risers to convert it to a solid oak look.

Reconditioning your stairs may sound challenging, but with the new Contract range of readymade 20mm Solid Oak stair treads and faced risers it couldn’t be easier, just cut to size and stick over your existing treads.

Our range has everything you need to clad most configurations of staircases including straight flights, winder flights and quarter landings. The product has been designed to be as simple as possible with minimal preparatory work required. Simply remove your existing stair covering, sand any major unevenness, cut your treads to size and glue them in place with a polymer adhesive.

Treads are grooved on the back edge to accept Tread Extension T&G boards that fit together to cover winder steps and mid landing areas 

Solid Oak Cladding Stair Tread 

20mm Solid Oak Tread with Bullnose 265mm (deep) 1000mm (wide)

We now supply a Top Landing Tread to match the thickness of your floor covering between 20mm and 15mm thick. This will allow you to continue to cover your landing area with solid oak flooring or engineered Flooring 

Solid Oak Stair Cladding Fitting Guide

Before you start your stair cladding installation please read the instructions fully and contact us if you have any queries.

  1. Before you start, ensure that your existing steps and riser boards are clean, dry and free from uneven defects. We suggest you thoroughly sand the steps to ensure you get a good sound base for your new Stair Treads and Risers
  2. Measure the existing bullnose protrusion from the face of the existing riser board to the furthest point of the bullnose on the existing step. You can then cut packing strips from timber that will push the bottom of the Stair Riser board out and in line with the end of your bullnose. We suggest that these packing strips are screwed into place for stability.
  3. Starting at the Top of the staircase, measure and cut three Stair Risers to size and glue them onto the packing strips using polymer adhesive
  4. Measure the depth and width and cut a Stair Tread to size. Apply a 10mm bead of Flexible Polymer Adhesive to the top of your existing step
  5. Press the Stair Tread onto the Adhesive firmly ensuring the Stair Riser fits securely into the groove on the bottom of the Stair Tread
  6. Continue down the stairs fitting 3 riser boards first and then the treads.
  7. If you reach a mid-landing, then use the same method above but use Solid Oak Extension Boards to cover the landing area. These are supplied with a tongue and groove on the long edges that slot into the back edge of the tread.
  8. If you have large Kite Winder Steps, then you may need to use the 1500mm wide Stair Treads and Risers with Stair Extension Boards. You can usually use 1000mm Treads and Risers with Extension Boards for triangular shaped winders no wider than 1000mm
  9. Fix the stair treads and any joining riser boards first then cut the extension boards to size, apply a good amount of polymer adhesive and push the boards together until the area is covered. Do not put adhesive between the T&G joints.
  10. Work your way down the stairs to the bottom floor or use the Stair Klad Bottom Bullnose Step for cladding bullnose steps. This is supplied with a light oiled finish
  11. You will need to apply a coat of oil on your Stair after installation to ensure an even colour and protect the timber. Remember you will need to maintain your Stair Cladding after installation by oiling regularly to keep the timber looking fresh and protected

Once fitted the treads and risers will need to be finished with a good quality hardwood oil or varnish.

You can download the Cheshire Mouldings StairKlad Instructions manual from here

Delivery



We deliver to UK Mainland only. We charge £10 shipping for orders up to £150. Orders over this have a flat fee of £15. However, our couriers do deliver to most offshore locations but charge a premium which unfortunately we have to pass on. Contact us for prices to Isle of Wight, Scottish Isles, Northern Ireland and Channel Isles etc.



IMPORTANT: PLEASE DO NOT BOOK ANY TRADESMAN OR SCHEDULE WORK UNTIL YOUR ORDER HAS BEEN RECEIVED AND CHECKED. BLUEPRINT JOINERY WILL NOT ACCEPT ANY LIABILITY FOR LOSS OF TIME OR MONIES DUE TO DELAYED DELIVERY.



We wrap and pack your order to ensure the product reaches you in the condition it left us, however, occasionally transport damages do occur. On the day of your delivery please check all products are present and in good condition.



Deliveries are made using a 3rd party carrier, due to the weight and length of our product we cannot give timed deliveries, however, we can specify a suitable day when you can be available to accept and sign for your order. Our 3rd party carrier does not give pre-delivery calls prior to the delivery, it is an all day delivery slot.



Deliveries are made using a 3rd party carrier on pre-arranged delivery days where possible. Delivery times shown on Go Banana are estimated, if we have not contacted you to arrange a specific delivery day then please email us to confirm. A note of the delivery day will be found on the sales invoice - If we haven't emailed please check there.



You will need to be available to help unload and sign for your order. When you sign for your order you are accepting that the goods are all present and received in good condition.



We advise that all customers:



1) Check you are signing for the correct number of parcels



2) Check all parcels are addressed to you



3) Check that all parcels are undamaged - if there are any signs of damage to any of the parcels ensure you sign and write "damaged" on the delivery slip



4) Open all parcels on the day of delivery to check all products have been received in good order and complete



5) Contact us on the day of delivery if there are any issues with your order



6) Blueprint Joinery will replace any damaged products on a next working day service.



IMPORTANT: If the above is not acceptable to you then we can pick and pack your order ready for you to collect or send in your own transport. Please do not buy our product if you do not accept the above delivery statements.